Download Print this page

Interpump Group GENERAL PUMP DMC12V Operator's Manual

Industrial hose reel electric motor kit

Advertisement

Quick Links

ACCESSORIES
DMC12V: 12 Volt DC Variable Speed Controller Rewind Kit
30 amp auto-reset circuit breaker
Heavy duty momentary on/off switch
Variable speed knob with built in
on/off function
LED power indicator light
Reversible powder-coated mounting
plate for left or right orientation
Sealed Housing
Part Number
Voltage
Max Amps
Working Temperature
SAFETY PRECAUTIONS
1. Make sure incoming pressure does not exceed the rated
pressure.
2. Use proper eye protection when assembling and using the
hose reel.
3. Assemble the hose reel on a clean workbench
free of debris and moisture.
4. Use soap and water when checking for air leaks.
5. Keep children away from work area.
WARNING!
Exposure of skin directly to
pressurized air or fluids could
result in severe bodily injury!
General Pump
1174 Northland Drive • Mendota Heights, MN 55120
Phone: 651.686.2199 • Fax: 800.535.1745
www.generalpump.com • email: sales@gpcompanies.com
DMC12V
12 VDC
30 A
-4⁰F - 104⁰F
Ref 310109 Rev. F
07-21
INDUSTRIAL
DHRA50300 & 2103410
SHOWN
• POWERFUL 12V DC MOTOR
• LONG LASTING HARDENED
GEARS
• HOSE REEL SOLD
SEPARATELY
• Weight: 21 lbs.
OPERATOR'S MANUAL
Ref 310109 Rev. F
07-21
General Pump
is a member of
The Interpump Group
Hose Reel
Electric
Motor Kit
From General Pump
2103410

Advertisement

loading
Need help?

Need help?

Do you have a question about the GENERAL PUMP DMC12V and is the answer not in the manual?

Questions and answers

Summary of Contents for Interpump Group GENERAL PUMP DMC12V

  • Page 1 Ref 310109 Rev. F 07-21 result in severe bodily injury! General Pump General Pump 1174 Northland Drive • Mendota Heights, MN 55120 is a member of The Interpump Group Phone: 651.686.2199 • Fax: 800.535.1745 www.generalpump.com • email: sales@gpcompanies.com...
  • Page 2 POWERED HOSE REEL ASSEMBLY INSTRUCTIONS 1. On the end of the hose reel opposite the lock, assemble the two ring Rings Concentric gear halves to the hose reel using carriage bolts, washers and lock nuts. with Center Shaft Two alignment pins are supplied to make it easier. Torque to 100 in-lbs. 2.
  • Page 3 Cap, 1/2 NPT-F P/N 2530130 Screw Set, M4 Gear, Spur, 12T (Kit 2103410) P/N 2200115 P/N 2530129 (Kit 2103410) (Kit 2103410) Nut, Lock, M8 (4X) Bolt, HHCS, 5/16-18 (4X) P/N 2200053 P/N 2200116 (Kit 2103410) (Kit 2103410) Washer, Flat, M8 (4X) Washer, Lock, M8 (4X) P/N 2200013 P/N 2203507...

This manual is also suitable for:

2103410