Advertisement
Quick Links
GENERAL PUMP
For suction-fed injection of sand into the water
PARTS
ATTACH TO GUN
1/4" Plug
PLACE IN SAND
General Pump
is a member of
the Interpump Group
A member of the Interpump Group
stream for abrasive cleaning.
DSDBK1
(HOSE NOT SHOWN)
2103026
MIXING NOZZLE AND SEAL
SPECIFICATIONS
Part Number
DSDBK1
Sandblast Kit
Description
Complete
Max. Working
3500 PSI
Pressure
Min. Working
1500 PSI
Pressure
Max. Flow
Min. Flow
Inlet
Max. Temperature
Weight
WATER/SAND OUTLET
DSDBK1
Water Sandblasting Kit
2103026
Mixing Nozzle
and Seal
3500 PSI
1500 PSI
8 GPM
8 GPM
3 GPM
3 GPM
1/4" Plug
N/A
200º F
200º F
4.2 lb.
2.0 lb.
CONNECT WITH
HOSE
Ref 300634 Rev. C
06-23
Advertisement
Related Manuals for Interpump Group GENERAL PUMP DSDBK1
Summary of Contents for Interpump Group GENERAL PUMP DSDBK1
- Page 1 DSDBK1 GENERAL PUMP A member of the Interpump Group Water Sandblasting Kit For suction-fed injection of sand into the water stream for abrasive cleaning. SPECIFICATIONS Part Number DSDBK1 2103026 Sandblast Kit Mixing Nozzle Description Complete and Seal Max. Working 3500 PSI...
- Page 2 GENERAL PUMP DWSDBTK Industrial Water Sandblasting Kit A member of the Interpump Group OPERATION Refer to the application table for the type of sand recommended Always wear protective clothing, including safety glasses while for your work surface. operating machine. Always point the sand nozzle downward when not spraying. This Connect the sand induction probe to the stub lance on the will prevent water from entering the sand supply.
Need help?
Do you have a question about the GENERAL PUMP DSDBK1 and is the answer not in the manual?
Questions and answers