Configuring The Product - F-SECURE POLICY MANAGER PROXY 2.0 Administrator's Manual

Configuring the product

This topic describes how to configure F-Secure Policy Manager Proxy on Linux.
1. Configure F-Secure Policy Manager Proxy by editing the /opt/etc/f-secure/fspmp/conf/proxy.cfg
file.
For example, f you need to configure chained proxies:
a) Add the host name or IP address of the Policy Manager Proxy or HTTP proxy with which this proxy
communicates to the line chained_proxy_ip_addr=.
b) Specify the TCP port of the Policy Manager Proxy or HTTP proxy with which this proxy communicates
on the line chained_proxy_port=.
c) If the HTTP proxy with which this proxy communicates requires a user name for authentication, add
the user name to the line http_proxy_user=.
d) If the HTTP proxy with which this proxy communicates requires a password for authentication, add the
password to the line http_proxy_password=.
2. Restart F-Secure Policy Manager Proxy to apply the configuration changes by entering the command
/etc/init.d/fspmp restart.
F-Secure Policy Manager Proxy | Using the product on Linux | 15