Table of Contents
Advertisement
42 | F-Secure Anti-Virus for Windows Servers | How to use automatic updates
Change the Internet connection settings
Usually there is no need to change the default settings, but you can configure how the server is connected
to the Internet so that you can receive updates automatically.
To change the Internet connection settings:
1. Go to
Automatic Updates
2. On the
•
Select
•
Select
connection.
•
Select
3. On the
Internet.
•
Select
•
Select
•
Select
in your web browser.
4. Under Update server, you can select the following options:
•
Turn on
F-Secure Policy Manager Server or F-Secure Policy Manager Proxy if it cannot connect to specified
update sources.
•
In the
to F-Secure Policy Manager Server or F-Secure Policy Manager Proxy if it cannot connect to specified
update sources.
•
In the
to update sources to receive the latest updates.
Add a Policy Manager proxy server
If you add a Policy Manager proxy server, the product downloads updates through this proxy, which can mean
faster updates.
Note: These instructions apply only when the product is installed in the centrally- administered mode
and the product is managed with F-Secure Policy Manager.
To add a new proxy server:
1. Go to
Automatic Updates
2. Click
Add new
3. Enter the URL of the proxy server.
4. Edit the priority of the proxy servers.
Communications.
Internet connection checking
Assume always connected
Note: If your computer does not actually have the permanent network connection and is set up
for dial-on-demand, selecting
Detect connection
to retrieve updates only when the product detects an active network
Detect traffic
to retrieve updates only when the product detects other network traffic.
Tip: If you have an uncommon hardware configuration that causes the
to detect an active network connection even when there is none, select
Use HTTP proxy
list, select whether or not your computer uses a proxy server to connect to the
No HTTP Proxy
if your computer is connected to the Internet directly.
Manually configure HTTP proxy
Use browser's HTTP proxy
Allow fetching updates from F-Secure Update Server
Server failover time
field, enter the time (in hours) after which you want the server to connect
Server polling interval
field, enter the time (in minutes) how often you want the server to connect
Communications
proxy....
list, select how your computer is connected to the Internet.
if you have a permanent network connection.
Assume always connected
to configure the HTTP proxy settings.
to use the same HTTP proxy settings that you have configured
Policy Manager
can result in multiple dial-ups.
Detect connection
Detect traffic
to allow the server to connect to
Proxies.
setting
instead.
Advertisement
Table of Contents
