Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support FIREPLACE TV STAND MODEL:J02158-70+SF316-36T We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
· SAFETY INFORMATION IMPORTANT SAFETY INFORMATION PLEASE READ ALL OF THE INFORMATION IN THIS OPERATING MANUAL, INCLUDING ALL SAFETY, OPERATING, AND MAINTENANCE INFORMATION. TO AVOID THE POTENTIAL RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,USERS SHOULD FOLLOW THE DIRECTIONS AND WARNINGS IN THIS MANUAL 1.
Page 4
· SAVE THESE INSTRUCTIONS There are no user serviceable parts inside the fireplace/heater. If the unit appears to malfunction, turm WARNING the unit off and unplug it from the wall immediately, and contact Customer. This heater is hot during use. To avoid burns, do not expose bare skin to hot surfaces.
· SAFETY INFORMATION (CONTINUED) GROUNDING INSTRUCTIONS Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in DANGER doubt as to whether the product is properly grounded. Do not modify the plug provided with the product.
Page 7
· ASSEMBLY(FIREPLACE) STEP 1 Take out the unit from the box and layout all the spare parts for easy assembly. Make sure all small items are not left in packaging materials. STEP 2 Take out the electric fieplace, lay it down and remove the 3 screws at the bottom.
Page 8
· ASSEMBLY(FIREPLACE) STEP 4 Decorative Crystal Rocks and Log Set. STEP 5 This step requires two adults for assembly. You can put the fireplace on the table, replace the glass front and secure it with screws at the bottom.
· ASSEMBLY(WOODEN CABINET) SAFETY INFORMATION Please read and understand the entire manual before attempting to assemble, install, or operate the product. WARNING! You may need an adult to assist with some steps. CAUTION! Before assembly and installation, carefully unwrap all parts. Locate and set aside the hardware kit before disposing of the packaging.
· OPERATION Identifying the control panel • The control panel is located on the right side of the fireplace/heater unit. • The control panel contains the heater control (1), timer function (2),flames control (3),and main power (4). • The display is on the PP panel in the top right corner of the fireplace. ...
Page 36
· F-63°F-64°F-65°F-66°F-67°F-68°F-69°F-70°F-71°F。 After this is set, the display (on the PP panel) will fash five times and exit fom setting status. • With the heater on, gently press and hold the heater button (1) for five seconds to switch between degree Fahrenheit and degree Celsius. There are 12 levels to change Celsius temperature 22°c-23°c-24°c-25°c-26°c-27°c-ON-00-17°c-18°c-19°c-20°c-21°c.
Page 37
· OPERATION Note:Long press the timer button(2) for approximate 5 seconds to control the ember color , The color setting are as follows: Using the flames function Press the flame control button (3) manually to set flame color. The flame color settings are as follows:...
Page 38
· OPERATION • Brightness Control • Long press the flame button(5) for appoximate 5 seconds to contrrol the brightness of the flame display The brightness settingare as follows: Note: Flame brightness is set to 100% by default. Using the main power button Press the power button(4) to turn the fieplace/heater unit on and off.Press the power button (4) once to turn the unit on.Press again to turn the unit off.
Page 39
· USING THE REMOTE CONTROL 1. Heater Control 2. Timer Control 3. Flame Control 4. Main Power 5. Heater ON /OFF 6. Ember Bed Control Note:For botton (2) (3) (4),The operation work the same as button on the control panel. ...
· Do not ingest batteries. WARNING 1. Non-rechargeable batteries are not to be recharged. 2. Batteries are to be inserted with the correct polarity. 3. Exhausted batteries are to be removed from the product. 4. Always purchase the correct size and grade of battery that is most suitable for the intended use.
· cloth with liquid cleaner or soft soap if necessary; Don NOT use cleaning powders or any other substance with abrasives since these substances will scratch glass. Under no circumstances should this product be operated with a broken or chipped glass panel. Do not strike or slam the glass.
· PRODUCT PARAMETER Model J02158-70+SF316-36T Power 1400W Voltage AC 120V 60Hz Desktop 150 LBS Maximum Loading Weight Bulkhead 25 LBS Product Color Brown Brown + White Product Size 1778*394*828mm...
Page 43
· Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED.
Page 44
· Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the J02158-70+SF316-36T and is the answer not in the manual?
Questions and answers