Related Manuals for Mityvac Fluid Evacuator Plus
Summary of Contents for Mityvac Fluid Evacuator Plus
- Page 1 Fluid Evacuator Plus 8.8 Liter/9.3 Quarts Capacity MODEL 07201 - MV9 Page Section AUG - 2003 Form 822589...
- Page 2 Rinse out the reservoir tank with clean solvent or engine degreaser. Allow it to dry thoroughly. 9. If you wish to use the Fluid Evacuator Plus to dispense oil from the Fluid Evacuator Plus, fill the cleaned reservoir tank with new oil and simply switch the selector valve that is mounted on the side of the pump assembly to “dispense”.
- Page 3 Allow it to dry thoroughly. 7. If you wish to use the Fluid Evacuator Plus to dispense transmission fluid from the Fluid Evacuator Plus, fill the cleaned reservoir tank with new transmission fluid and simply switch the selector valve that is mounted on the side of the pump assembly to “dispense”.
- Page 4 Rinse out the reservoir tank with clean solvent or engine degreaser. Allow it to dry thoroughly. 7. If you wish to use the Fluid Evacuator Plus to dispense coolant from the Fluid Evacuator Plus, fill the cleaned reservoir tank with new coolant and simply switch the selector valve that is mounted on the side of the pump assembly to “dispense”.
- Page 5 Model 07201 Service Items Item Description Part No. Item Description Part No. 1 Vacuum tube Kit 822559 6 Base Kit **** 822574 2 Handle kit 822561 7 Evacuator Top Kit ***** 822576 3 Valve Kit * 822563 8 Pump Strap Kit (Quanity 2) 822578 4 Tube Connector Kit ** 822566...
-
Page 6: Limited Warranty
LIMITED WARRANTY- Lincoln warrants the equipment it supplies to be free from defects in material and workmanship for one (1) year following the date of purchase. If equipment proves to be defective during this warranty period it will be repaired or replaced, at Lincoln’s discretion, without charge provided that factory authorized examination indicates the equipment to be defective.
Need help?
Do you have a question about the Fluid Evacuator Plus and is the answer not in the manual?
Questions and answers