Advertisement
A quick and simple procedure that refills your master cylinder reservoir and/or
hydraulic clutch reservoir with new fluid when bleeding a hydraulic system.
Fluid feeder adapter fits most pint and quart brake fluid bottles (1-1/4" wide
mouth). Also Included are three master cylinder reservoir adapter plates.
INSTRUCTIONS
For replacing old fluid with new when bleeding your system:
1. Screw feeder adapter onto brake fluid bottle.
2. Select the appropriate master cylinder plate and place it on top of the
master cylinder reservoir.
3. Invert bottle of fluid with feeder adapter attached and insert feeder adapter
into hole in the master cylinder plate. Push down on the feeder adapter
until locks into the feeder plate (see illustration).
4. Bleed the hydraulic system as recommended by the manufacturer.
NOTE: Take care when inserting and removing brake fluid bottle to avoid
spillage.
MARCH - 04
Form 822721
Fluid Refill Kit
www.mityvac.com
- MV22
Section
MVA 6825
- 1
Page
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mityvac MVA 6825
Summary of Contents for Mityvac MVA 6825
- Page 1 Fluid Refill Kit MVA 6825 A quick and simple procedure that refills your master cylinder reservoir and/or hydraulic clutch reservoir with new fluid when bleeding a hydraulic system. Fluid feeder adapter fits most pint and quart brake fluid bottles (1-1/4" wide mouth).
- Page 2 LINCOLN INDUSTRIAL STANDARD WARRANTY LIMITED WARRANTY Lincoln warrants the equipment manufactured and supplied by Lincoln to be free from defects in material and workmanship for a period of one (1) year following the date of purchase, excluding therefrom any special, extended, or limited warranty published by Lincoln.
Need help?
Do you have a question about the MVA 6825 and is the answer not in the manual?
Questions and answers