Dogtra ARC800FREE PLUS Code Setting Manual

ARC800FREE PLUS / ARC802 FREE PLUS
Rheostat Dial
1.
Start with the receiver/collar turned off and
the transmitter turned on. On the front of the
transmitter there is a D1/D2 toggle switch. Set this
toggle switch on the "D1" position to synchronize
the transmitter with the BLACK collar/receiver.
Set the toggle switch on the "D2" position to
synchronize the transmitter with the ORANGE
collar/receiver.
Nick
Button
Constant
Button
3.
Hold the Nick button and the Constant
button on the front of the transmitter
simultaneously down for 3 seconds or until the
rapid green blink of the LED on the receiver/collar
resumes a slower pace. The code setting work is
now completed
Dogtra-Europe
Code setting guide for
•D1
•D2
LCD Screen
12 – 14 Rue Augustin Fresnel 78310 Coignieres, FRANCE
TEL: +33 (0) 130 62 65 65
2.
With the receiver turned off, place the red
dot on the transmitter to the red dot on the
receiver. Hold together until the green LED blinks
rapidly on the receiver.
4.
The LED on the receiver flashes once every 4
seconds when the connection is complete. If
you push the Pager button of the transmitter, the
receiver/collar will vibrate.
E-mail: info@dogtra-europe.com
ENGLISH
On/Off
Magnetic
Red Dot