Download Print this page
Chamberlain KLIK3U Instructions Manual
Chamberlain KLIK3U Instructions Manual

Chamberlain KLIK3U Instructions Manual

Universal remote control
Hide thumbs Also See for KLIK3U:

Advertisement

Available languages

Available languages

Quick Links

MODEL KLIK3U
UNIVERSAL REMOTE CONTROL
The remote control can be programmed to
activate up to two products, such as a
garage door opener, gate operator, or
commercial door operator. Each button on
the remote control works independently of
the other and must be programmed separately. The images
throughout this manual are for reference only and your
product may look different.
STOP
manufactured after 1993 that utilize photoelectric sensors.
The photoelectric sensors are always located on or near the
bottom of the door track.
To prevent possible SERIOUS INJURY or DEATH from a
moving gate or door:
• ALWAYS keep remote controls out of reach of
children. NEVER permit children to operate, or play
with remote control transmitters.
• Activate gate or door ONLY when it can be seen
clearly, is properly adjusted and there are no
obstructions to door travel.
• ALWAYS keep gate or door in sight until completely
closed. NEVER permit anyone to cross path of moving
gate or door.
Read instructions thoroughly BEFORE
beginning. If using the Universal Remote Control
with residential door openers, the remote control
must be used only with door openers

Advertisement

loading
Need help?

Need help?

Do you have a question about the KLIK3U and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Chamberlain KLIK3U

  • Page 1 MODEL KLIK3U UNIVERSAL REMOTE CONTROL The remote control can be programmed to activate up to two products, such as a garage door opener, gate operator, or commercial door operator. Each button on the remote control works independently of the other and must be programmed separately. The images throughout this manual are for reference only and your product may look different.
  • Page 2: Getting Started

    The following instructions are for a garage door opener with a Program/LEARN button. For DIP SWITCH programming instructions or additional help please visit www.chamberlain.com/klik3. Program/ LEARN Button DIP Switch...
  • Page 3 PROGRAMMING Remove the cover. Press and hold the program button until the LED turns on. Program Button Cover Press and release the Program/LEARN button on your garage door opener. Select a button to program. Press and release the button the specified number of times according to the chart on the following page.
  • Page 4 Rolling Code * NOTE: LiftMaster, Do-It, Master Mechanic, Raynor, True Value and Sears Craftsman are compatible with Chamberlain technology. ** NOTE: Visit www.chamberlain.com/klik3 for Genie Intellicode II instructions. Press the program button on the remote control to save. Program Button...
  • Page 5 TEST Test the remote control by pressing the button. If the garage door opener does not activate, repeat the programming steps or visit www.chamberlain.com/klik3 for additional instructions. BATTERY To prevent possible SERIOUS INJURY or DEATH: • NEVER allow small children near batteries.
  • Page 6 (2) this device must accept any interference received, including interference that may cause undesired operation. Need Help? Go to www.chamberlain.com/klik3 or call 1-800-442-1255 All trade names used herein are trademarks of respective manufacturers listed.
  • Page 7 MODÈLE KLIK3U TÉLÉCOMMANDE UNIVERSELLE La télécommande universelle peut être programmée pour activer jusqu’à deux produits, comme un ouvre-porte de garage, un actionneur de portail ou de porte commerciale. Chaque bouton de la télécommande fonctionne indépendamment l’un de l’autre et doit être programmé séparément. Les illustrations de ce manuel ne sont fournies qu’à...
  • Page 8: Pour Commencer

    à proximité du produit. Les instructions suivantes servent à programmer un ouvre-porte de garage à l’aide d’un bouton de programmation/d’apprentissage. Pour obtenir les instructions de programmation du COMMUTATEUR DIP ou de l’aide supplémentaire, visiter www.chamberlain.com/klik3. Bouton de programmation/ d’apprentissage Interrupteur DIP...
  • Page 9 PROGRAMMATION Retirer le couvercle. Enfoncer le bouton de programmation jusqu’à ce que la DEL s’allume. Bouton de programmation Couvercle Enfoncer et relâcher le bouton intelligent/d’apprentissage sur votre ouvre-porte de garage. Sélectionner un bouton à programmer. Enfoncer et relâcher le bouton le nombre de fois précisé dans le tableau qui figure à...
  • Page 10 * REMARQUE : LiftMaster, Do-It, Master Mechanic, Raynor, True Value et Sears Craftsman sont compatibles avec la technologie Chamberlain. ** REMARQUE : Visitez www.chamberlain.com/klik3 pour les instructions pour le Genie Intellicode II. Enfoncer le bouton de programmation sur la télécommande pour mettre en mémoire.
  • Page 11 ESSAI Tester la télécommande en enfonçant le bouton. Si l’ouvre- porte de garage ne s’active pas, répéter les étapes de programmation ou aller à www.chamberlain.com/klik3 pour des instructions supplémentaires. ATTENTION PILE AVERTISSEMENT AVERTISSEMENT Pour éviter des BLESSURES GRAVES, VOIRE MORTELLES : •...
  • Page 12 Besoin d’aide? Aller à www.chamberlain.com/klik3 ou composer le 1-800-442-1255 Toutes les appellations commerciales ici utilisées sont les marques déposées des fabricants représentés. © 2014, The Chamberlain Group, Inc. All Rights Reserved Tous droits réservés 114A4748...