Advertisement
Quick Links
SUMAKE
4.5" Air Angle Grinder W/Spindle Lock
(Lever Type) (W/O Grinding Wheel)
Specification:
Free Speed
Spindle Thread
Motor
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
ST-GD150L
12,000 r/min
ST-GD150L3: M14x2.0
ST-GD150L6: 5/8"-11
0.8 HP
29 CFM (820 L/min)
8-1/2" (217mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
3.53 lbs (1.6 kg)
PNEUMATIC TOOLS
Noise and Vibration:
Vibration
EN ISO 28927-1
Load:
6.82 m/s²
Uncertainty
K= 1.5 m/s
Noise
EN ISO 15744
Sound Pressure Level
load: 90 dB(A)
Sound power level
load: 101 dB(A)
Uncertainty
K= 3dB
²
ST-GD150L-S-2401A-D5F
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
Advertisement
Related Manuals for Sumake ST-GD150L
Summary of Contents for Sumake ST-GD150L
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! K= 1.5 m/s K= 3dB ² Net Weight 3.53 lbs (1.6 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-GD150L-S-2401A-D5F...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 4.5" AIR ANGLE GRINDER W/SPINDLE LOCK (LEVER TYPE) Model/ Serial No.： ST-GD150L to which this declaration applies, complies with these normative documents: ...
- Page 3 2. Hold Stop Spanner by hand, Screw up Disc Maintenance Clean the hose with a blast of compressed air Screw with Hex Spanner in clockwise SUMAKE is a manufacturer and exporter of air before connecting the hose to air tool. This will direction. Lubrication tools since established.
-
Page 4: Parts List
ST-GD150L AIR ANGLE GRINDER PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty GD155L3-01S Spacer (M14x2.0) GD154L-21 Spring Pin GD155L6-01S Spacer (5/8"-11) GD154L-22 Spacer GD154L-02 Lock Nut GD154L-23 Rotor Blade GD154L-03 Wave Washer GD154L-24 Rotor GD150L-04 4" Wheel Cover... - Page 5 GRINDER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 be used over the maximum peripheral speed of an abrasive product. 14. The operator shall pay attention that no bystanders are in the vicinity. 15. Personal protective equipment, such as suitable gloves, an apron and a helmet, shall be used. 16.
- Page 8 Additional safety instructions for pneumatic power tools Air under pressure can cause severe injury. Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when not in use, before changing accessories or when making repairs.
Need help?
Do you have a question about the ST-GD150L and is the answer not in the manual?
Questions and answers