Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Motor
Minimun Diameter
Chamfering Capacity
Minimum Chamfering Depth
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
Air Chamfering Tools
ST-CM110
28,000 r/min
0.4HP
7mm
1.5mm C
8mm(0.12")
2 CFM (57 L/min)
7-4/9" (189mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
1.25lb (0.57kg)
Noise and Vibration:
Vibration
EN ISO 28927-1
Sound Pressure Level
Load:
4.5 m/s²
Uncertainty
K= 1.5 m/s
²
Noise
EN ISO 15744
Please always
load: 81.5 dB(A)
Sound power level
environment
load: 92.5 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-CM110-S-2209A-JUF
Remark
wear ear
protector at
hearing!
Advertisement
Related Manuals for Sumake ST-CM110
Summary of Contents for Sumake ST-CM110
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty hearing! Air Pressure 90 psi (6.3 bar) K= 1.5 m/s K= 3dB ² Net Weight 1.25lb (0.57kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-CM110-S-2209A-JUF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR CHAMFERING TOOLS Model/ Serial No.：ST-CM110 to which this declaration applies, complies with these normative documents: Machinery Directive: 2006/42/EC ... - Page 3 2. Hold Stop Spanner by hand, Screw up Disc Maintenance Clean the hose with a blast of compressed air Screw with Hex Spanner in clockwise SUMAKE is a manufacturer and exporter of air before connecting the hose to air tool. This will direction. Lubrication tools since established.
-
Page 4: Parts List
ST-CM110 AIR CHAMFERING TOOLS PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty J2-005114501-04 Air Inlet J2-013124401 Rotor J2-004112401 Exhaust Deflector J2-014121101 Blade J2-916024515 O-Ring J2-9282006 Spring Pin J2-030107001 Trigger J2-012121101 Cylinder J2-001112401 Housing J2-015121101 Front Plate J2-9283016 Spring Pin... - Page 5 GRINDER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 be used over the maximum peripheral speed of an abrasive product. 14. The operator shall pay attention that no bystanders are in the vicinity. 15. Personal protective equipment, such as suitable gloves, an apron and a helmet, shall be used. 16.
- Page 8 Additional safety instructions for pneumatic power tools Air under pressure can cause severe injury. Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when not in use, before changing accessories or when making repairs.
Need help?
Do you have a question about the ST-CM110 and is the answer not in the manual?
Questions and answers