Table of Contents
Advertisement
Quick Links
SUMAKE
4" Air Angle Grinder (Roll Type)
Specification:
Free Speed
Pad Size
Motor
Spindle Thread
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
(W/O Grinding Wheel)
ST-GD534G
11,000 r/min
4" (100mm)
0.78HP
ST-GD534G2 - M10x1.5
ST-GD534G5 - 3/8"-24
19 CFM (540 L/min)
8-6/7" (225mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
3.97Lb (1.8kg)
Noise and Vibration:
Vibration
EN ISO 28927-1
Sound Pressure Level
Load:
1.2 m/s²
Uncertainty
K= 1.5 m/s
²
Noise
EN ISO 15744
Please always
load: 89 dB(A)
Sound power level
environment
load: 100 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-GD534G-S-2208A-KHF
Remark
wear ear
protector at
hearing!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-GD534G
Summary of Contents for Sumake ST-GD534G
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! K= 1.5 m/s K= 3dB ² Net Weight 3.97Lb (1.8kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-GD534G-S-2208A-KHF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 4" AIR ANGLE GRINDER (ROLL TYPE) Model/ Serial No.： ST-GD534G2, ST-GD534G5 to which this declaration applies, complies with these normative documents: ...
- Page 3 Fix Spanner in clockwise direction. Before connecting the hose , apply 4 or 5 drops of SUMAKE is a manufacturer and exporter of air #60 spindle oil at the air inlet. Use of a thicker oil 1-3 Air hose tools since established.
- Page 4 ST-GD534G, ST-GD534L, ST-GD535G, ST-GD535L AIR ANGLE GRINDER PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty GD534-01 Housing GD534-29 Regulator Valve GD534-02 Exhaust Deflector GD534-30 Lock Nut (Roller Type) GD534-03 Screw GD534-04 Screw GD534-31 O-Ring GD534-05 Washer GD534-32 Handle body...
- Page 5 GRINDER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 be used over the maximum peripheral speed of an abrasive product. 14. The operator shall pay attention that no bystanders are in the vicinity. 15. Personal protective equipment, such as suitable gloves, an apron and a helmet, shall be used. 16.
- Page 8 Additional safety instructions for pneumatic power tools Air under pressure can cause severe injury. Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when not in use, before changing accessories or when making repairs.
Need help?
Do you have a question about the ST-GD534G and is the answer not in the manual?
Questions and answers