Advertisement
Quick Links
We:
SUMAKE INDUSTRIAL CO., LTD.
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan
declare in sole responsibility that the equipment
Equipment：1/4"(6MM) REVERSIBLE AIR DIE GRINDER
Model/ Serial No.：
to which this declaration applies, complies with these normative documents:
Machinery Directive: 2006/42/EC
and conforms to the following EN standard,
EN ISO 12100: 2010
EN ISO 11148-9:2011
Name and Signature/Position
Mike Su – Managing Director
EC
DECLARATION OF CONFORMITY
ST-7492, ST-7492M
Date and Place
2024/5/2
Taipei, Taiwan
ST-7492(M)-D-2407A-STF
Advertisement
Related Manuals for Sumake ST-7492
Summary of Contents for Sumake ST-7492
- Page 1 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment：1/4"(6MM) REVERSIBLE AIR DIE GRINDER Model/ Serial No.： ST-7492, ST-7492M to which this declaration applies, complies with these normative documents: ...
- Page 2 Use a 3 HP or larger compressor for each stops running released. contact with electric power source. Sumake is a manufacturer and exporter of air sander. 2. It is forbidden to use this tool in explosive tools since established. We have devote all our...
-
Page 3: Parts List
ST-7492, ST-7492M 1/4"(6MM) REVERSIBLE AIR DIE GRINDER (LOW NOISE) PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty 7492-01 Screw (M4x8) 7492-18 Washer (17x33.2x0.8T) 7492-02 Regulator 7492-19 Rear Plate 7492-03 Snap Ring (RTW-18) 7492-20 Rotor Blade 7492-04 Regulator Set... - Page 4 DIE GRINDER Original instructions SUMAKE Industrial Co. Ltd.
- Page 5 Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 6 to protect hands. 2. Operators and maintenance personnel must be physically able to handle the bulk, weight and power of the tool. 3. Hold the tool correctly: be ready to counteract normal or sudden movements – have both hands available. 4.
-
Page 7: Specific Safety Instructions
3. Never direct air at yourself or anyone else. 4. Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings. 5. Whenever universal twist couplings (claw couplings) are used, lock pins shall be installed and whipcheck safety cables shall be used to safeguard against possible hose-to-tool and hose-and-hose connection failure.
Need help?
Do you have a question about the ST-7492 and is the answer not in the manual?
Questions and answers