Using Remote Control - Zenith ZLD15A1 Operating Manual & Warranty

Using remote control

Inserting batteries
Inserting batteries
1 Pull the battery cover
upward in the arrow
direction to remove.
2
Insert the batteries
with correct polarity.
3 Replace the battery
compartment cover.
* Apply two 1.5V alkaline batteries of AAA type. Don't mix the used batteries with new bat-
teries.
* Remove batteries when you don't use the remote control for long time. Liquid leakage from
old battery may cause operation failure.
Notes for using remote control
Notes for using remote control
Make sure these are no
objects between the
remote control and its sen-
sor.
22
Don't place the remote control
near a heater or damp place.
Strong impact on remote con-
trol may cause operation fail-
ure.
tv/video menu enter vol vol ch
remote control
power
tv/video
sensor
flashbk cc
menu mute
ch
vol enter vol
ch sleep
Signal from the remote con-
trol may be disturbed by sun
light or other strong light. In
this case, turn the set to other
direction.
ch power
206-3652