Table of Contents
Advertisement
Adjusting audio condition
Selecting bilingual signals
Selecting bilingual signals
Screen display in stereo signal
Screen display in bilingual signal : SAP
* Bilingual (dual language) signal
This signal contains the secondary language signal in addition to the primary language.
There are the primary and secondary language and stereo modes in bilingual signal.
[Mono] : The primary language is output from left and right speaker. Signal mode is mono.
[Stereo] : The primary language is output from left and right speaker. Signal mode is stereo.
[SAP] : The secondary language is output from left and right speaker.
1
Press the
menu
screen display as below.
Treble
Bass
Balance
MTS
Use
D D E E F F G G
And
2
Press the channel (
select [MTS].
* If some strange sound is heard when watching TV programs on stereo mode in poor signal
areas, or if in non-dual signal service area, make sure to select mono mode.
* [Stereo] or [Mono] mode can be available only when broadcasting signal contains the data.
42
: Stereo
button to select the
50
50
0
Mono
A
) buttons to
D,E
3
Press the volume (
select an audio mode you want.
Treble
Bass
Balance
MTS
Use
And
D D E E F F G G
Each press of volume ( F , G ) buttons
changes the screen display as below.
Mono
4
Press the
enter
) buttons to
F , G
50
50
0
Mono
A
Stereo
SAP
(
) button.
A
206-3652
Advertisement
Table of Contents
