Table of Contents
Advertisement
Rear Panel
ANT LOOP OUT
Connects to TV ANT IN jack. Provides an RF connection between the
HDTV Receiver and the TV. Provides the signal of ANT IN jack to TV.
OUTPUT SELECTION
Select either YPbPr or RGB depending on how you connect the HDTV Receiver
to the TV.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
ANT IN
Use to receive HDTV signal from external/internal antenna
connected to the HDTV Tuner.
VIDEO OUT
Connect to a TV with video inputs.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
YPbPr OUT
Connect to a TV with YPbPr inputs.
AUTHORIZED SERVICE ONLY
Is used only for authorized service purposes.
RGB OUT
Connect to a TV with RGB inputs.
AUDIO OUT (Left/Right)
Connect to a TV, amplifier, receiver or stereo system.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
AC Power Cord
Plug into the power source.
7
Advertisement
Table of Contents
