Dtv Signal; Setup Settings; Channel Label - Zenith HDV420 Installation And Operating Manual, Warranty

SETUP Settings (Continued)

DTV Signal

Shows the antenna signal strength bar for antenna to help you adjust the
antenna to the correct position from your location.
Press MENU to display the on-screen menu.
1 1
Select the SETUP menu using 3 3 / 4 4 then press
2 2
Select the DTV Signal using 3 3 / 4 4 .
3 3
The signal strength bar will be displayed.
Press MENU to return to the previous screen or press EXIT on the
4 4
remote control to return to TV viewing.
ip
You can also view signal strength bar by pressing SIGNAL on the remote
control.

Channel Label

You are also able to set the logo of a channel on the surf list by pressing the
Info button on the remote. A dialog box will ask what you want to do with the
highlighted logo area: you can replace the highlighted logo area with the cur-
rent channel, or delete it.
Press MENU to display the on-screen menu.
1 1
Select the SETUP menu using 3 3 / 4 4 then press
2 2
EZ Scan will be highlighted.
Select the Ch. Label using 3 3 / 4 4 then press
3 3
Ch. Label menu appears.
Select a channel to add a logo to by using CH (+/–).
4 4
Select a logo using 3 3 / 4 4 / 1 1 / 2 2 .
5 5
Press (SELECT).
6 6
The logo is added to the channel.
Repeat steps 4 and 6 to add additional logos.
7 7
Press MENU to return to the previous screen or press EXIT on the
8 8
remote control to return to TV viewing.
(SELECT) or 2 2 .
(SELECT) or 2 2 .
(SELECT) or 2 2 .
17