Troubleshooting Checklist - Zenith P42W22 Owner's Manual

No picture &
No sound
Picture OK &
No sound
The remote control
doesn't work
No or Poor color
or Poor picture
No output from one
of the speakers
54

Troubleshooting Checklist

• Check whether the Monitor is turned on.
• Power cord inserted into wall power outlet?
• Plug another product's power cord into the wall outlet where
the Monitor's power cord was plugged in to test outlet.
• Press the VOLUME (
• Sound muted? Press MUTE button.
• Check to see if there is any object between the Plasma
Display and the remote control causing obstruction.
• Check to see if the batteries are installed with the correct
polarities. (Refer to p.29)
• Install new batteries. (Refer to p.29)
• Select COLOR
G
UME ( ) button. (Refer to p.35)
• Increase the distance between the Monitor and the VCR.
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the
screen gets dark.)
• Adjust BALANCE
• Is speaker connected?
G
) button.
in the PICTURE menu and press the VOL-
in the SOUND menu. (Refer to p.37)