Turning On The Monitor - Zenith P42W22 Owner's Manual

Turning on the Monitor

- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
Plug power cord into power outlet correctly.
1
2
Press the main ON/OFF button on the Monitor. At this moment, the Monitor is
switched to standby mode. Press the
Monitor or press power on or video/pc button on the remote control to turn
the Monitor on.
Turning on the Monitor (power cord is still connected)
1
If the Monitor is turned off with the
Press the
or video/pc button on the remote control to turn the Monitor on.
2
If the Monitor is turned off with the ON/OFF button on the Monitor
• Press the main ON/OFF button on the Monitor to turn the Monitor on.
3
If the Monitor is turned off with the remote control and also the ON/OFF
button on the Monitor
• Press the main ON/OFF button on the Monitor and then press the
INPUT SELECT button on the Monitor or press the power on or video/pc
button on the remote control to turn the Monitor on.
Tip
• Adjusting sound level
The volume (
decreases the sound level.
30
or INPUT SELECT button on the Monitor or press the power on
) button increases the sound level and the volume (
G G
or INPUT SELECT button on the
button on the Monitor
or
) button
F F