Rear Panel & Connections; Panel Controls - Yamaha DJX-II Owner's Manual

Rear Panel & Connections
• Connect the AC adap-
tor (PA-5B, PA-5C or
other adaptor specifi-
cally recommended by
Yamaha) to the power
supply jack.
See page 12 for details.
The LINE OUT jacks are used to send
the DJX-II output to a DJ mixer, stereo
sound system, mixing console, or tape
recorder.
Amplifier
These are for recording an external audio source in
the Sampling functions (page 53).
The MIC jack is for connection to a microphone for
recording vocals and acoustic instruments.
The LINE IN jack is for connecting to and recording
a line level signal, such as that of a CD player or
cassette deck.
A standard pair of stereo head-
phones can be plugged in here for
private practice or late-night play-
ing. The internal stereo speaker
system is automatically shut off
when a pair of headphones is
plugged into the PHONES jack.
CD
• Do not listen with the head-
phones at high volume for long
periods of time. Doing so may
cause hearing loss.
• Connect the DJX-II to external
equipment only after turning off
power for all devices. To prevent
damage to the speakers, set the
volume of the external devices at
the minimum setting before con-
necting them. Failure to observe
these cautions may result in
electric shock or equipment
damage.
The DJX-II also features MIDI terminals,
allowing you to interface the DJX-II with
other MIDI instruments and devices. (For
more information, see page 68.)
MD
• Never connect a line level signal (CD player, cas-
sette deck, electronic instrument, etc.) into the
MIC input jack! Doing this could damage the
DJX-II and its Sampling functions.

Panel Controls

11