Page 1
XS4 Original+ for Scandinavian modular mortise locks The Salto XS4 Original+ wide body version is designed to fit most Scandinavian profile doors and mortise locks standards. Easy to install and retrofit, it can replace your existing door hardware and fits any door with a broad range of different models and functions.
Page 2
INSTALLATION GUIDE | XS4 Original+ for Scandinavian modular mortise locks S i 6xx m 00 ff t x h r series Inside Outside For more information S i 6xx.. series S i 6xx.. series CLICK OUTSIDE INSIDE OUTSIDE INSIDE HERE IP54 IP44 IP55 IP44 EN16867: 2021...
Page 3
Only for SALTO LS5N detector models Lock not included Lås ikke inkluderet SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn. * Required only for doors that exceed 60mm thickness. SALTO recommande * Skal kun anvendes på døre hvor tykkelse er mere end 60mm.
Page 4
INSTALLATION GUIDE | XS4 Original+ for Scandinavian modular mortise locks Select handing VÆlg retning for greb Valitse kätisyys Välj höger / vänster PUSH Do not disconnect! Demonter ikke! Älä katkaise yhteyttä! Far ej urkopplas! PAGE 4/13 saltosystems.com...
Page 11
INSTALLATION GUIDE | XS4 Original+ for Scandinavian modular mortise locks AT THIS POINT DO NOT CLOSE THE DOORPROGRAM THE LOCK FIRST LUK IKKE DØREN FØR LÅSEN ER TESTET TESTAA TASSA VAIHEESSA LUKKO ENNEN KUIN SULJET OVEN STÄNG INTE DÖRREN, TESTA LÅSET FÖRST PAGE 11/13 saltosystems.com...
Page 13
Cylinder Vrider Cylinder ***** HOTEL GUEST ROOM LOCK LÅS FOR HOTEL VÆRELSE HOTELLIN VIERASHUONE HOTELL ENHET Only for SALTO LS5N detector models Outside Udvendig Required only for doors that exceed 60mm (2-3/8") Unplug if mortise lock is thickness LS5Nxx series with cable * Skal kun anvendes på...
Need help?
Do you have a question about the XS4 Original+ and is the answer not in the manual?
Questions and answers