Page 1
Installation Guide Wall-Mount Lavatory Faucet Trim K-T154 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página “Español-1” 1031911-2-A...
Observe all local plumbing and building codes. If needed, complete the finished wall before beginning this installation. Kohler Co. reserves the right to make revisions in the design of faucets without notice, as specified in the Price Book. 1031911-2-A Kohler Co.
Page 3
Press the spout escutcheon firmly against the finished wall. Slide the spout onto the spout shank, position as desired, and tighten the setscrew to secure the spout in place. Remove any excess putty or sealant. Kohler Co. 1031911-2-A...
Thread an escutcheon onto the threaded sleeve. Remove any excess putty or sealant. Position the handle on the stem extension. Turn the handle to the closed position (Hot = Counterclockwise, Cold = Clockwise). Repeat the procedures with the second handle. 1031911-2-A Kohler Co.
Remove the aerator. Open the valves and run water through the spout for about a minute to remove any debris. Check for leaks. Remove all debris from the aerator. Turn the valves off, and reinstall the aerator. Kohler Co. 1031911-2-A...
Need help?
Do you have a question about the K-T154 and is the answer not in the manual?
Questions and answers