Related Manuals for Kohler K-T448
Summary of Contents for Kohler K-T448
- Page 1 Installation Guide Wall-Mount Lavatory Faucet Trim K-T448 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página “Español-1” 1031913-2-A...
-
Page 2: Tools And Materials
Observe all local plumbing and building codes. If needed, complete the finished wall before beginning this installation. Kohler Co. reserves the right to make revisions in the design of faucets without notice, as specified in the Price Book. 1031913-2-A Kohler Co. - Page 3 Press the spout escutcheon firmly against the finished wall. Slide the spout onto the spout shank, position as desired, and tighten the setscrew to secure the spout in place. Remove any excess putty or sealant. Kohler Co. 1031913-2-A...
-
Page 4: Install The Handles
If adjustment is needed to achieve the desired handle alignment, remove the handle, screw and spline adapter. Turn the spline adapter 1/4 turn. Check the handle position. Repeat the procedure until the proper handle position is achieved. Secure with the screw. 1031913-2-A Kohler Co. - Page 5 Thread the handle assembly onto the escutcheon. To maintain the proper handle alignment, hold the handle in place with one hand and turn the base of the handle with the other hand. Repeat the procedures with the second handle. Kohler Co. 1031913-2-A...
-
Page 6: Complete The Installation
Remove the aerator. Open the valves and run water through the spout for about a minute to remove any debris. Check for leaks. Remove all debris from the aerator. Turn the valves off, and reinstall the aerator. 1031913-2-A Kohler Co.
Need help?
Do you have a question about the K-T448 and is the answer not in the manual?
Questions and answers