Vivotek SD7313 User Manual page 59

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Please follow the steps beolw to setup a profile:
1� Check Enable this profile�
2� Select the applied mode: Day mode, Night mode, or schedule mode� Please manually enter a range of
time if you choose Schedule mode�
3. Configure Exposure Settings in the second column. Please refer to page 57 for detailed information�
4. Configure EIS Settings in the third column. Please refer to the last page for detailed information�
5� Click Save to enable the setting and click Close to exit the page�
Advanced Mode
Video quality settings for stream 1 / stream 2
The Network Camera offers two choices of video compression standards for real-time viewing: MPEG-4
and MJPEG.
Click the items to display the detailed configuration settings. You can set up two seperate streams for the
Network Camera for different viewing devices� For example, set a smaller frame size and lower bit rate
for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web
browsers�
If MPEG-4 mode is selected, the video is streamed via RTSP protocol�
There are four parameters provided in MPEG-4 mode which allow you to adjust the video performance:
User's Manual - 59