Vivotek IP8332 User Manual page 140

VIVOTEK
start <ip address>
end <ip address>
index <value>
return <return page> Redirect to the page <return page> after the parameter is assigned. The
8.7 Event/Control HTTP Tunnel Channel
Note: This request requires
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/admin/ctrlevent.cgi
-------------------------------------------------------------------------
GET /cgi-bin/admin/ctrlevent.cgi
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
-------------------------------------------------------------------------
POST /cgi-bin/admin/ ctrlevent.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie
in GET and POST should be the same to be recognized as a pair for one session. The contents of upstream
should be base64 encoded to be able to pass through the proxy server.
This channel will help perform real-time event subscription and notification as well as camera control more
efficiently. The event and control formats are described in another document.
See Event/control tunnel spec for detail information
140 - User's Manual
The starting IP address to add or to delete.
The ending IP address to add or to delete.
The start position to add or to delete.
<return page> can be a full URL path or relative path according to the current
path. If you omit this parameter, it will redirect to an empty page.
Administrator privileges.