Recording
Advanced Mode
This section explains how to configure the recording settings for the Network Camera.
Recording Settings
Insert your SD card and click here to test
NOTE
► Before setting up this page, please set up the Network Storage on the Server Settings page first.
► Please remember to format your SD card when using for the first time. Please refer to page 96 for
detailed information�
Network Storage Setting
Click
Server
to open the Server Settings page and follow the steps below to set up:
1� Fill in the information for your server�
For example:
1
2� Click Test to check the setting� The result will be shown in the pop-up window�
3
Network storage path
(\\server name or IP address\folder name)
2
4
User name and password for your server
VIVOTEK
User's Manual - 93