Vivotek IP8161 User Manual page 58

VIVOTEK
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Sensor Settings Profile Settings page as shown below.
Please follow the steps beolw to setup a profile:
1� Check Enable this profile�
2� Select the applied mode: Day mode, Night mode, or schedule mode� Please manually enter a range of
time if you choose Schedule mode�
3. Configure Exposure settings in the second column. Please refer to last page for detailed information�
4� Click Save to enable the setting and click Close to exit the page�
58 - User's Manual