Vivotek FD8361 User Manual page 153

Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
"network_accessname_<0~(m-1)>" is the accessname for stream "1" to stream "m". Please refer to the
"subgroup of network: rtsp" for setting the accessname of SDP.
You can get the SDP by HTTP GET.
Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/<network_http_s<0~m-1>_accessname>
For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
For details on streaming protocol, please refer to the "control signaling" and "data format" documents.
Senddata (capability.nuart>0)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/viewer/senddata.cgi?
[com=<value>][&data=<value>][&flush=<value>] [&wait=<value>] [&read=<value>]
PARAMETER VALUE
com 1 ~ <max. com port
number>
data <hex decimal data>[,<hex
decimal data>]
flush yes,no
DESCRIPTION
The target COM/RS485 port number.
The <hex decimal data> is a series of digits from 0 ~ 9, A ~ F.
Each comma separates the commands by 200 milliseconds.
yes: Receive data buffer of the COM port will be cleared before
VIVOTEK
User's Manual - 153