Step 3: Connect The Power Supply - Visioneer OneTouch 9450 User Manual

S 3: C
TEP ONNECT THE
Connect the power supply and power cord, and plug the power supply
into an electrical outlet.
To connect the power supply:
1. Plug the power supply into its power port on the scanner.
Note: Only use the power supply (HEG42-240100-7L(A) LF made
by HiTRON) included with your scanner. Connecting any other type
of power supply may damage your scanner and will void its warranty.
2. Plug the power cord into the power supply and then into a wall
outlet.
Now proceed to the next section, "Step 4: Connect the USB Cable
and Turn on the Power."
S 3: C
TEP ONNECT THE
P S
OWER UPPLY
P S 17
OWER UPPLY