Step 3: Connect The Power Supply - Visioneer Patriot 470 User Manual

14 V P
ISIONEER ATRIOT
470 (S XP 470) S
TROBE CANNER
S 3: C
TEP ONNECT THE
Connect the power supply and power cord, and plug the power supply
into an electrical outlet.
To connect your Visioneer Patriot 470 (Strobe XP 470) scanner:
1. Plug the power supply into the power port on the scanner.
Note: Only use the power supply (HEG42-240200-7L made by
HiTron) included with your scanner. Connecting any other type of
power supply may damage your scanner, and will void its warranty.
2. Plug the power cord into the power supply and into a wall outlet.
Now proceed to the next section, "Step 4: Connect the USB Cable
and Turn on the Power."
U ' G
SER S UIDE
P S
OWER UPPLY