4
V
9450 S
ISIONEER
U
'
G
CANNER
SER
S
UIDE
W
Y
N
HAT
OU
EED
An IBM-compatible Pentium PC, or AMD equivalent with:
A CD-ROM drive
■
An available Universal Serial Bus (USB) port; 1.1 or 2.0
■
Microsoft Windows XP (Service Pack 1 or 2) or
■
Windows 2000 (Service Pack 4)
Available internal memory (RAM) as follows:
■
128 MB or more
■
256 MB recommended for Windows XP
■
200 MB minimum of free hard disk space
■
Note: USB 2.0 ports operate at higher speeds than USB 1.1 ports. If
your computer is not equipped with USB 2.0 ports, you can add
them with the Visioneer Hi-Speed USB 2.0 PCI Card. Visit the
Visioneer web site at www.visioneer.com for ordering information, or
contact the dealer where you purchased your Visioneer 9450 USB
scanner. However, you do not have to add USB 2.0 ports to your
computer. Your scanner will work with both USB 1.1 and USB 2.0
ports.
A VGA or SVGA Monitor
The recommended settings for your monitor are:
High Color (16-bit) or True Color (24-bit or 32-bit)
■
Resolution set to at least 800 x 600 pixels
■
To set your monitor's colors and resolution:
Open the Windows Control Panel
■
Double-click on Display then select the Settings tab.
■