UVC interface, and it can also support network streaming by entering the stream key and stream code. When using the UVC interface, the NeoLive R5 will be recognized as an HD webcam by PC supporting MJPEG and YUY2 formats (MJPEG format is default under USB2.0, YUY2 format is the default under USB3.0.
2.Local Panel Operations 2.1 Image Section 2.1.1 The "BKGD" button is for the background signal switch. When this button is illuminated, it can switch the background layer in PST or PGM. (2.1.1) 2.1.2 The section shown below is the function area for setting PIP (Picture-in-Pic- ture) layers.
2.1.4 The section shown below is for selecting transition effects and setting tran- sition time. You can choose the desired transition effect and transition duration based on different scenarios. (2.1.4) 2.1.5 The section shown below is for setting the fifth media source. You can switch and pause the video being played.
2.3 Auxiliary Function Section 2.3.1 The section shown below contains the power button and lock button. After the switcher switched on, click the power button to turn it on, long press to turn it off. Long press the lock button to lock the panel, and short press to unlock it.
Page 7
2.3.4 The section shown below contains KEY buttons, which can quickly turn on the chroma key,LUMA key and DSK. (2.3.4) 2.3.5 The section shown below contains the screenshot button and background image button. Press "SHOT" to take a screenshot of the current PGM screen. Short press "GFX"...
3.Menu Functions 3.1 Input 3.1.1 The input setting includes 4 x HDMI input sources and the input reading and source selection for the 5th signal. When an HDMI input source is connected, the current input source resolution will be displayed. You can display the HDMI signal or a TP test signal.
3.3 Layer 3.3.1 In the Layer menu, you can select the input sources corresponding to the MAIN layer and the two PIP layers. MAIN PIP 1 MEDIA IN 1 IN 2 IN 3 IN 4 MEDIA PIP 2 (3.3.1) 3.3.2 The Layer menu also allows adjustments to the scaling size and cropping of the PIP layers.
3.6 Audio 3.6.1 In the audio setting, each audio channel can be individually adjusted. Short-pressing any audio channel allows access to the audio menu. 3.6.2 Knob 1 is the VOLUME knob, it adjusts the master output volume. Short press means mute the volume. 3.6.3 Knob 2 is the DELAY knob, which controls the delay of the current output volume.
3.8 Media 3.8.1 In the media menu, you can adjust the settings for the fifth signal source. In the current menu, you can select video signals from different storage devices, adjust the video playback speed, and loop playback. Video Local x0.2 (3.8.1)...
3.9.2 The R5 offers different types of logo transitions, including cut, fade in fade out and moving transitions. It also provides speed adjustments with slow, medium, and fast options. For moving transitions, you can choose from four directions: up, down, left, or right. Image Direction Load...
ENGLISH Calibration Auto Streaming Record Encode Encode H.264 H.264 Erase All Data on the Disk?? Used: 28 GB Total: 128 GB Bitrate Bitrate 30mbps 30mbps Formatting System Info Reset Verison : V3.64 SN : R2P-083-E201 Correction Call: (3.11) sales@sprolink.com www.sprolink.cn...
Need help?
Do you have a question about the NeoLIVE R5 and is the answer not in the manual?
Questions and answers