Table of Contents
Advertisement
21 and Advanced Router Configuration on page 38 for
details on configuring the router to connect to your ISP.
7. If the configuration seems correct, contact your ISP to verify
the settings needed to connect to their network.
8. If the configuration settings you have match those of your
ISP, there may be an incorrect configuration setting on some
other screen. Reset your router to factory defaults, and
start the configuration again.
9. If you are using PPPoE or Dynamic IP to connect to your ISP,
you can check the status of the connection from the Basic
Configuration, WAN, PPPoE or the Basic Configuration,
WAN, Dynamic IP (DHCP) screen.
button at the bottom of these screens to check the status of
the connection.
10. If you still cannot connect to you ISP, contact customer
support for your ISP.
93
Click the Status
Specifications
Model No
WNR2004
Standards
IEEE 802.3i, IEEE 802.3U, IEEE
802.3x, IEEE 802.11b
Network and
Static and Dynamic Routing with
Routing
TCP/IP, DHCP, PPPoE, DNS, NAT,
Protocols
TFTP, HTTP, IPSec, L2TP, PPTP
WAN Port
1 RJ-45 connector
LAN Ports
4 RJ-45 UTP connectors
Wireless Network
Auto-fallback 11, 5.5, 2 and 1 Mbps
Speeds
Wireless
WEP 64-bit
Encryption
WEP 128-bit
Wireless Range
Up to 150 m (500 ft.) indoors and 500 m
(1650 ft.) outdoors
LED Indicators
1 Power
1 Test
1 WAN (Link/Activity/Speed)
4 LAN (Link/Activity/Speed)
1 Wireless (Link/Activity)
Power
External 7.5V DC
o
Operating
32
- 104
Temperature
o
Storage
-4
– 158
Temperature
94
o
o
o
F (0
– 40
C)
o
o
o
F (-20
– 70
C)
Advertisement
Table of Contents
