Charging the Device Before using your range nder for the rst time, make sure it is fully charged. Utilize provided USB-C/Type-C cable to connect the device to a power source. During charging, the red light will be on. Once the battery is fully charged, the red light will turn green.
Page 4
Unit of Measurement Power on the range nder and look through the eyepiece; the measurement unit is displayed at the top right corner. When the range nder is in Mode 1 or 2, long press and hold the 'MODE' button while looking through the range nder to switch between Yard, Meter, and Feet.
Page 5
Slope-Switch On Slope-Switch O To activate Mode 2, press the 'MODE' button brie y until the 'M2' icon appears on the left side of the screen. Then, aim at one target at a time, press the power button, and you will obtain both linear and slope-compensated distance readings.
Page 6
3, Why is the reading inaccurate? - Please ensure that the measurement units are set correctly: 'Y' for yards, 'M' for meters, and 'FT' for feet. 4, How to switch units? - Power on the range nder and look through the eyepiece; the measurement unit is displayed in the top right corner of the screen.
Page 7
1 x Range nder 1 x Carrying Case 1 x Lanyard 1 x User Manual 1 x Lens Cleaning Cloth 1 x Type-C(USB-C) Charging Cable 1, Do not use the range nder to measure objects through any type of glass, including windows. 2, To protect the lens coating, please avoid touching the surface with your ngers.
Need help?
Do you have a question about the VRP-1500 and is the answer not in the manual?
Questions and answers
Can you clean the interior of the lenses?