Advertisement
Installation Guide
8-Port Gigabit Ethernet PoE+ Easy Smart
Managed Switch (62W)
GS108EP
8-Port Gigabit Ethernet Hi-Power PoE+ Easy
Smart Managed Switch (123W)
GS108EPP
Package contents
•
NETGEAR Easy Smart Managed Switch
•
Power adapter (power cable varies by region)
•
Wall installation kit
•
Rubber feet
Advertisement
Table of Contents
Related Manuals for NETGEAR GS108EP
Summary of Contents for NETGEAR GS108EP
- Page 1 8-Port Gigabit Ethernet PoE+ Easy Smart Managed Switch (62W) GS108EP 8-Port Gigabit Ethernet Hi-Power PoE+ Easy Smart Managed Switch (123W) GS108EPP Package contents • NETGEAR Easy Smart Managed Switch • Power adapter (power cable varies by region) • Wall installation kit • Rubber feet...
-
Page 2: Register Your Switch
From a computer or mobile device that is connected to the Internet, visit my.netgear.com. Log in to your NETGEAR account. If you don’t have a free NETGEAR account, you can create one. The My Products page displays. From the menu on the left, select Register a Product. -
Page 3: Check The Leds
Failure to do so can damage the switch. WARNING: Before connecting this switch to outdoor cables or devices, see kb.netgear.com/000057103/ for safety and warranty information. 3. Check the LEDs When you connect the power cord to the switch and plug it into an electrical outlet, the LEDs indicate the status. - Page 4 (UPnP) discovery. You can use your computer’s network settings to discover the switch. Alternatively, you can download the NETGEAR Discovery Tool (NDT). The NETGEAR Discovery Tool lets you discover the switch in your network and access the device user interface (UI) of the switch from a Mac, Windows-based, or Linux- based computer.
-
Page 5: Poe Considerations
The PoE and PoE+ power supplied by the switch is prioritized in ascending port order: Ports 1–4 support PoE and PoE+ with a total power budget of 62W for the GS108EP and 123W for the GS108EPP. If the power requirements for the attached powered devices (PDs) exceed... -
Page 6: Mount The Switch On A Wall
PoE LED on the switch lights solid green. If the PoE LED lights solid yellow, a PoE fault occurred and PoE halted because of one of the conditions listed in the following table. NOTE: For PoE specifications, see kb.netgear.com/000062481. PoE Fault Condition Possible Solution A PoE-related short circuit occurred on the port. - Page 7 See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
Need help?
Do you have a question about the GS108EP and is the answer not in the manual?
Questions and answers