Elements International CH600DR Assembly Instructions

Cautions: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury,
therefore, for your protection, please remove any exposed staples used in parking.
1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier,
and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton druring shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly
purchased product correctly and efficiently.
PART LIST
No.
Part Description
A
DRESSER
BUN FOOT
B
DRESSER CENTER SUPPORT LEG
C
Remark : Please be noted that the
safety bracket set with instruction
is attached at the right first drawer.
ASSEMBLY INSTRUCTIONS FOR
ITEM NO : CH600DR
DESCRIPTION : DRESSER
Q'ty
Code.
1
BFT
4
1
DSPL
The legs inside the
bottom drawer
B
Step 1
HARDWARE LIST
No.
Hardware Description
1 Tipping Restraint
C
Q'ty
Code.
1
ATKT
A
1 Tipping Restraint
Step 2