Elements International MY-10700-X-TT3 Assembly Instruction

ASSEMBLY INSTRUCTIONS
Make sure you have all parts before beginning assembly. Two persons are needed for assembly.
Do not fully tighten all bolts until assembly is completed.
PART LIST
No.
C
D
DESCRIPTION
TOP Bed Ends
Guard Rails
Side Rails
Qty
2
4
HARDWARE LIST
ALLEN BOLT 1/4 3
1
4
"
Qty
1. Place four Metal Dowels (H.1) in the four holes in the Bottom Bed Ends (B)
2. Lift the Top Bed ends (A) onto the Bottom Bed Ends (B), ensuring that the dowels are inserted in holes In the Top
Bed Ends.
3. Attach the four Side Rails (D) and two Guard Rails (C) to the Top and Bottom Bed Ends (A and B) with 24 Allen
Bolts (H.2) and 24 Barrel Nuts (H.3), and tighten.
4. Place Roll out Slats Kit (E) across the bed surface stretching slats from bed end to bed end. Secure all the
slats with 18 Wood Screws (H.4) as shown in the next page.
5. Repeat step 4 in the other bed assembly.
6. Add the mattress not to exceed 6" in thickness including foundation.
SKU
24
BARREL NUTS 24
WOOD SCREW 1" 36
TOOLS REQUIRED: DRILL OR SCREWDRIVER
No.
H.1
H.2
H.3
H.2
DESCRIPTION
ALLEN WRENCH 1
H.3
STEP 1
STEP 2
STEP 3
A
A
B
B
C
C
D
D
D
D
E
E
BOTTOM Bed Ends
METAL DOWELS
H.4
H.1
4
B
A
E
Twin Roll-out Slats 2
2
2
Pag. 1 of 5
F
F Bunk Ladder 1
MY-10700- X-C3
MY-10700- X-C2
MY-10700- X-C18
MY-10700-UC27
MY-10700- X-C4
MY-10700- X-TT3
Sku
PMY-
10700-
TT3HW