Elements International MY-10700-X-F1 Assembly Instructions

ASSEMBLY INSTRUCTIONS
MY-10700-X -F1
C
H.1
No. SKU
A
MY-10700-X -C34
B
MY-10700-X-C1
C
MY-10700-X-C32
D
MY-10700-UC8
Make sure you have all parts before beginning assembly. Two persons are needed for assembly.
Do not fully tighten all bolts until assembly is completed.
1. Attach the two Full Wall Bed Ends (C) and Four Drawers Storage Pedestal (B) and the Side Rail (in Twin Wall Bed
Ends box) with 8 Allen Bolts (H.2) and 8 Barrel Nuts (H.3), and tighten.
2. Attach the two Full Wall Bed Ends (C) with 3 Wood Screws (H.3) on each the Mending Plate (H.4) (next page).
3. Place Full Roll out Slats Kit (D) across the bed surface stretching slats from bed end to bed end. Secure all the
slats with 18 Wood Screws (H.3) as shown in the next page.
4. Add the mattress not to exceed 6" in thickness including foundation.
A
H.2
PART LIST
DESCRIPTION Qty
Wall Bed Open Unit
Four Drawers Storage
Pedestal
Full Wall Bed Ends
Full Roll-out Slats
D
B
No. DESCRIPTION
1 H.1 ALLEN BOLT 1/4 3 1/4"
H.2 BARREL NUTS
1
H.3 WOOD SCREW 1"
2
H.4 FULL MENDING PLATE
1
ALLEN WRENCH
TOOLS REQUIRED: DRILL OR SCREWDRIVER
C
HARDWARE LIST
Sku
PMY-
10700-
FTWBHW
Qty
8
8
30
2
Pag. 1 of 4