Subscribe to Our Youtube Channel
Related Manuals for Gamma TX-6 450 Z
Summary of Contents for Gamma TX-6 450 Z
- Page 1 TX-6 450 Z 450w Spot/Beam Hybrid User Manual GAMMA LED Vision – TX-6 Z Page 1 of 21...
-
Page 2: Table Of Contents
Patching/Pixel Mapping Guidelines:...................... 8 DMX Basics............................... 8 DMX Wiring..............................9 DMX Modes and Configuration......................... 10 3. Maintenance............................... 15 Routine Maintenance............................15 Troubleshooting Problems..........................15 4. Technical Specifications..........................16 5. Photometrics............................... 18 GAMMA LED Vision – TX-6 Z Page 2 of 21... -
Page 3: Introduction And Setup
Stack-able 8-Facet Circular and 6-Facet Linear Prisms, with Fully Independent • Control and Rotation 540º Pan and 270º Tilt • 0-30 Hz Electronic Strobe • DMX-512 and RDM Control • GAMMA LED Vision – TX-6 Z Page 3 of 21... - Page 4 Colors, Gobos, and Prisms: Fixed Gobo Wheel GAMMA LED Vision – TX-6 Z Page 4 of 21...
-
Page 5: Rotating Gobos
Rotating Gobos Gobo Size 22.8mm OD, 16mm Image GAMMA LED Vision – TX-6 Z Page 5 of 21... - Page 6 Prisms: Prism 1 Prism 2 Combined GAMMA LED Vision – TX-6 Z Page 6 of 21...
-
Page 7: Mounting And Operation
Fixture must be 1’ from any flammable materials. Do not light any flammable objects closer than 6.5 feet. GAMMA LED Vision – TX-6 Z Page 7 of 21... - Page 8 Do not allow other fixtures to shine a focused beam upon the display on lens of this fixture. GAMMA LED Vision – TX-6 Z Page 8 of 21...
-
Page 9: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of purchase to be free of manufacturer and workmanship defects. Warranty does not cover normal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vision is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual. -
Page 10: Setup And Operation
Screen Saver Set a Screen Saver Mode Screen Rot Set Screen Rotation for Hanging/Sitting, or leave in Auto for Automatic Rotation DMX Indicate Set the Mode for the DMX Indicator Light GAMMA LED Vision – TX-6 Z Page 10 of 21... -
Page 11: Dmx Setup
A channel is a set of 255 steps that are assigned to control attributes in each light. This may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes. GAMMA LED Vision – TX-6 Z Page 11 of 21... -
Page 12: Dmx Wiring
XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: GAMMA LED Vision – TX-6 Z Page 12 of 21... -
Page 13: Dmx Channels
Falling Strobe, Slow to Fast 156-207 Rising Strobe, Slow to Fast 208-212 Open 213-251 Random Strobe, Slow to Fast 252-255 Open Color Wheel 1 Open 2-127 Linear Color Wheel 128-131 132-135 Green GAMMA LED Vision – TX-6 Z Page 13 of 21... - Page 14 Magenta Color Mixing, Linear Yellow 0-255 Yellow Color Mixing, Linear Fixed Gobo Wheel Gobo 1 – Reducer 1 Gobo Open 10-14 Gobo 2 – Dots Square 15-19 Gobo 3 – Assorted Dots GAMMA LED Vision – TX-6 Z Page 14 of 21...
- Page 15 CW Gobo Scroll, Slow to Fast Zoom 0-255 4º – 50º Zoom Focus 0-255 Motorized Focus Rotating Gobo Wheel 0-9 Open 10-19 Rotating Gobo 1 20-29 Rotating Gobo 2 30-39 Rotating Gobo 3 GAMMA LED Vision – TX-6 Z Page 15 of 21...
- Page 16 Stop 196-255 CCW Rotate, Slow to Fast Prism 2: Linear 6- 0-127 Open Facet 128-255 Prism 2 Inserted Prism 2 Rotate 0-127 Prism Indexing 128-187 CW Rotate, Fast to Slow GAMMA LED Vision – TX-6 Z Page 16 of 21...
- Page 17 CCW Rotate, Slow to Fast Frost 0-127 Open 128-255 Frost Inserted Reset 0-209 No Function 210-215 Reset Pan/Tilt 216-219 No Function 220-235 Reset Effects Motors 236-239 No Function 240-255 Reset All GAMMA LED Vision – TX-6 Z Page 17 of 21...
-
Page 18: Maintenance
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • GAMMA LED Vision – TX-6 Z Page 18 of 21... -
Page 19: Technical Specifications
3 pin DMX input and output • PowerCon Compatible Input and Output • Ingress Protection: IP20 • Temperature Range: -4° F to 104° F • Dimensions: 14.96” x 10.63” x 25.29” • Weight: 50.71lbs • GAMMA LED Vision – TX-6 Z Page 19 of 21... -
Page 20: Photometrics
65° Beam Angle 20° Beam Angle 3° Field Angle 117° Field Angle 22° Field Angle 5’ 64800 7330 10’ 16200 2140 15’ 6690 1130 20’ 4050 25’ 2267 30’ 1672 GAMMA LED Vision – TX-6 Z Page 20 of 21... - Page 21 CRI, TM-30, and Spectral Distribution GAMMA LED Vision – TX-6 Z Page 21 of 21...
Need help?
Do you have a question about the TX-6 450 Z and is the answer not in the manual?
Questions and answers