Related Manuals for Gamma Orux 700
Summary of Contents for Gamma Orux 700
- Page 1 Orux 700 LED Moving Beam/Spot User Manual ORUX 700 Hybrid – GAMMA LED Vision Page 1 of 20...
-
Page 2: Table Of Contents
DMX Wiring................................9 DMX Modes and Configuration........................11 3. Maintenance................................16 Routine Maintenance............................16 Troubleshooting Problems..........................16 A. The unit does not work:..........................16 B. Not Responding to the DMX Controller....................16 4. Technical Specifications............................17 Photometric Reports............................17 ORUX 700 Hybrid – GAMMA LED Vision Page 2 of 20... -
Page 3: Introduction And Setup
Introduction and Setup The ORUX 700 is a full-featured Profile moving head featuring a variety of advanced features including CMY Color Mixing, multiple gobo wheels, color wheel, prism, zoom, frost, and more! Unpacking and In the Box Unpacking: Remove the fixture carefully from the box. -
Page 4: Features
You may need to install or modify the connector that ships with the ORUX 700 to meet your needs. A 3-prong grounding-type plug must be installed following the manufacturer’s instructions. If you have any doubts about the proper installation, consult a qualified electrician. - Page 5 Included Gobos: Gobo Wheel 1: 0 – Open Gobo Wheel 2: 0 – Open Animation Wheel: 0 – Open ORUX 700 Hybrid – GAMMA LED Vision Page 5 of 20...
-
Page 6: Safety Precautions
Safety Precautions The ORUX 700 is a professional grade stage light. Please read the following safety tips carefully and obey the safety noticed of this light before installation, use, and maintenance. Please disconnect power before opening or cleaning the fixture. -
Page 7: Customer Support
Customer Support • GAMMA LED VISION LLC warrants this product for a period of twelve (12) months from the date of purchase or date of manufacture*, to be free from defects in material and workmanship. *The date of manufacture will be used as the warranty period start date in cases where there is greater than a twelve (12) month difference between the date of manufacture and the date of purchase. -
Page 8: Setup And Operation
2. Setup and Operation On the base of the ORUX 700 we see the following connection points for power and data: 1. DMX Connections 2. Power Connection 3. Power Switch 4. Fuse Socket Using the LCD Menu and Buttons On the opposite side from the connections is the LCD Menu: ORUX 700 Hybrid –... -
Page 9: Menu Operation
Menu Operation The on-board menu allows you to setup the light to your needs. The ORUX 700 is also RDM enabled for remote setup, configuration, and monitoring. MENU Address DMX Address Set DMX Address, 1-512 Work Mode DMX Mode Set the signal mode, the only option is DMX mode for this fixture. -
Page 10: Dmx Setup
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resitance. Microphone cable is not DMX cable. Please refer to the diagram below: ORUX 700 Hybrid – GAMMA LED Vision Page 10 of 20... - Page 11 XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: ORUX 700 Hybrid – GAMMA LED Vision Page 11 of 20...
-
Page 12: Dmx Modes And Configuration
DMX Modes and Configuration Orux 700 has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or options but take up more of your output channels on your lighting console or software. - Page 13 132-171 Pulse, Slow-Fast 172-211 Slow Pulse Fast Close – Fast Pulse, Slow Close 212-251 Slow Pulse Fast Open – Fast Pulse Fast Open 252-255 Open Gobo Wheel 1 – 0-5 Open ORUX 700 Hybrid – GAMMA LED Vision Page 13 of 20...
- Page 14 000-255 Fine Control for Gobo Rotation Fine Gobo Wheel 2 – Open Fixed Gobos 5-10 Gobo 1 11-16 Gobo 2 17-22 Gobo 3 23-28 Gobo 4 29-44 Gobo 5 45-50 Gobo 6 ORUX 700 Hybrid – GAMMA LED Vision Page 14 of 20...
- Page 15 193-255 Animation, Slow to Fast Reserved Frost 0-127 Open 128-255 Frost Inserted Prism – 8 Facet 0-127 Open Prism 128-255 Prism Inserted Prism Rotate 0-127 Index 128-190 Rotate CW, Fast to Slow ORUX 700 Hybrid – GAMMA LED Vision Page 15 of 20...
- Page 16 Tilt Fine 0-255 Pan/Tilt Speed 0-128 Fast to Slow 129-170 1/3 Speed, Slow 171-211 ½ Speed, Medium 212-255 Fastest Speed Reserved 34owa Control 0-231 Reserved 232-255 Reset ALL (>3s) ORUX 700 Hybrid – GAMMA LED Vision Page 16 of 20...
-
Page 17: Maintenance
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • ORUX 700 Hybrid – GAMMA LED Vision Page 17 of 20... -
Page 18: Technical Specifications
• DMX signal connection: 3 and 5 pole XLR input and output • Pan/Tilt Resolution: 16 bit • Dimmer Resolution: 16 bit 1. Fixture Body • Two side handles for transportation ORUX 700 Hybrid – GAMMA LED Vision Page 18 of 20... - Page 19 • Fan speed control: Intelligently automatic fan speed adjustable. • Temperature electronic sensor detection. • LCD screen lighting information inquiry. • Up to GB7000.217-2008 standard and CE Certification 1. Weight • Net Weight: 32Kg ORUX 700 Hybrid – GAMMA LED Vision Page 19 of 20...
-
Page 20: Photometric Reports
Photometric Reports Distance FC – Zoom In FC – Zoom Out 10’ 25000 15’ 11100 25’ 3470 ORUX 700 Hybrid – GAMMA LED Vision Page 20 of 20...
Need help?
Do you have a question about the Orux 700 and is the answer not in the manual?
Questions and answers