Using the LCD Menu and Buttons........................8 DMX Setup................................10 DMX Basics...............................10 DMX Wiring..............................10 DMX Modes and Configuration........................12 3. Maintenance................................19 Routine Maintenance............................19 Fixture Cleaning..............................19 Troubleshooting Problems..........................19 Error Messages...............................19 Common Problems............................19 4. Technical Specifications............................21 Photometric Reports............................22 Orux 480 Z – GAMMA LED Vision Page 2 of 23...
Introduction and Setup Unpacking and In the Box Thank you for choosing the Orux 480 Z from GAMMA LED Vision. You will see you have ac- quired a powerful and versatile moving light. Inside the box you should find: •...
∙Warranty is voided if there are any malfunctions from not following the user manual while op- erating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. Orux 480 Z – GAMMA LED Vision Page 6 of 23...
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of pur- chase to be free of manufacturer and workmanship defects. Warranty does not cover nor- mal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vi- sion is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual.
Offers options to reset each individual motor inside the fixture separately. Calibrate Allows for calibration of individual parameters. Contact GAMMA LED Vision for password if required. Most users should never need this :) Fan Set Silent Set fans to silent/quiet mode...
Page 9
Auto Speed – set the speed of the auto programs. Slave Set the fixture as a slave for master/slave mode. DMX Mode Set the DMX Mode to 34 or 54 Channel. Orux 480 Z – GAMMA LED Vision Page 9 of 23...
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. Please refer to the dia- gram below: Orux 480 Z – GAMMA LED Vision Page 10 of 23...
Page 11
XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: Orux 480 Z – GAMMA LED Vision Page 11 of 23...
11-21 Open 22-126 Strobe, Slow to Fast 127-137 Open 138-201 Pulse Effect in Various Timings 202-212 Open 213-244 Random Strobe, Slow to Fast 245-255 Open Dimmer 0-255 Intensity Control Orux 480 Z – GAMMA LED Vision Page 12 of 23...
Page 13
Rotating Gobo Wheel Color Wheel 0-15 Open 16-22 Open/Red 23-29 30-36 Red/Green 37-43 Green 44-50 Green/Blue 51-57 Blue 58-64 Blue/Yellow 65-71 Yellow 72-78 Yellow/Amber 79-85 Amber 86-92 Amber/Magenta 93-99 Magenta Orux 480 Z – GAMMA LED Vision Page 13 of 23...
Page 14
Rotating Gobo 4 60-72 Rotating Gobo 5 73-85 Rotating Gobo 6 86-98 Rotating Gobo 7 99-111 Gobo 1 Shake, Slow to Fast 112-124 Gobo 2 Shake, Slow to Fast Orux 480 Z – GAMMA LED Vision Page 14 of 23...
Page 15
Gobo 8 102-112 Gobo 1 Shake, Slow to Fast 113-123 Gobo 2 Shake, Slow to Fast 124-134 Gobo 3 Shake, Slow to Fast 135-145 Gobo 4 Shake, Slow to Fast Orux 480 Z – GAMMA LED Vision Page 15 of 23...
Page 16
Frost Inserted Shutter 1A 0-255 Shutter Position Shutter 1A Fine 0-255 Fine Control of Shutter Position Shutter 1B 0-255 Shutter Rotation Shutter 1B Fine 0-255 Fine Control of Shutter Rotation Orux 480 Z – GAMMA LED Vision Page 16 of 23...
Page 17
Display Invert On 50-59 Auto Fan Control Mode 60-69 High Fan Control Mode 70-79 Silent Fan Control Mode 80-89 Square Law Dimmer Curve 90-99 Linear Dimmer Curve 100-149 150-159 Reset All Orux 480 Z – GAMMA LED Vision Page 17 of 23...
Page 18
34CH 54CH Function Value Description/Options 160-169 Reset Focus/Zoom 170-179 Reset Colors 180-189 Reset Gobos 190-199 Reset Other Motors 200-255 Orux 480 Z – GAMMA LED Vision Page 18 of 23...
Common Problems The following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: Orux 480 Z – GAMMA LED Vision Page 19 of 23...
Page 20
C. One of the functions is not working well The stepper motor might be damaged or the cable connected to the PCB is bro- • ken. The motor’s drive IC on the PCB may be bad. • Orux 480 Z – GAMMA LED Vision Page 20 of 23...
• Multiple DMX modes. • AC100-240v, 50/60Hz autosensing • 600w total power consumption from a 480w LED source (at 120v) • Weight – 75 lbs • Dimensions: 33”x15”x18” • Orux 480 Z – GAMMA LED Vision Page 21 of 23...
1812 Zoom 50%, Focused:25º Full White Intensity in FC Distance in Ft. 7980 2260 1030 1390 347.5 Zoom Out, Focused: 55º Distance in Ft. Full White Intensity in FC Orux 480 Z – GAMMA LED Vision Page 22 of 23...
Page 23
CRI and TM30 at Full Open White Orux 480 Z – GAMMA LED Vision Page 23 of 23...
Need help?
Do you have a question about the Orux 480 Z Profile and is the answer not in the manual?
Questions and answers