Clear Cmos Procedures - Biostar GF8200C M2 Setup Manual

Motherboard Manual
JCMOS: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting
and the CMOS data, please carefully follow the procedures to avoid damaging
the motherboard.

※ Clear CMOS Procedures:

1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
JCOM: Serial port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
16
3
Pin 1-2 Close:
Normal Operation (default).
3
3 1
Pin 2-3 Close:
Clear CMOS data.
Pin
1
2
3
4
5
6
7
2 10
8
9
10
1 9
1
1
Assignment
Carrier detect
Received data
Transmitted data
Data terminal ready
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC