Memory - EVGA 132-CK-NF79-A1 User Manual

nForce 790i Ultra SLI Motherboard
Drive A
Halt On
All Errors
Whenever the BIOS detects a nonfatal
error, the system stops and prompts you.
No Errors
ystem boot does not stop for any
S
detected errors.
All, But Keyboard
System boot does not stop for keyboard
errors, but does stop for all other errors.
All, But Diskette
The system boot does not stop for a diskette error but will stop for all
other errors.
All, But Disk/Key
The system boot does not stop for a keyboard or disk error, but will
stop for all other errors.

Memory

These settings are display-only values that are determined by the BIOS
POST (Power-On Self Test).
Base Memory
BIOS POST determines the
amount of base (or conventional) memory installed in the system.
Extended Memory
BIOS determines how much extended memory is present during the
POST.
Total Memory
This value represents the total memory of the system.
EVGA Corporation
38
January 11, 2008 | DU-03751-001_v01
[1.44, 3.5 in.]
[All , But Keyboard]
Base Memory
Extended Memory
Total Memory
Press ENTER to display sub-menu
Halt On
All Errors ..... [ ]
No Errors ..... [ ]
All , But Keyboard ..... [ ]
All , But Diskette ..... [ ]
All , But Disk/Key ..... [ ]
:Move ENTER:Accept
640K
1047552K
1048576K
ESC:Abort