Create Thera Studio User Manual page 11

A DJ UST I NG TH E SHO RT CO F F E E VO LU M E
1. Place a cup on top of the drip tray and press the short coffee button.
2. In standby mode, long press the short coffee button and the coffee machine will start
working. The coffee maker will start brewing coffee.
3. Release the button when you have reached the desired coffee volume.
4. This will complete the short coffee time setting (the minimum time is 10 seconds and the
maximum is 90 seconds).
A DJ UST I NG TH E VOLU ME O F LONG CO F F E E
1. Place a cup on top of the drip tray and press the long coffee button.
2. In standby mode, long press the coffee button and the coffee machine will start working.
The coffee maker will start brewing coffee.
3. Release the button when you have reached the desired coffee volume.
4. This will complete the long coffee time setting (the minimum time is 15 seconds and the
maximum is 90 seconds).
RE STOR E FACTORY SE T T I NGS
• To reset to factory settings, press and hold the power button and the long coffee button,
the power indicator light will flash twice and the factory settings will be restored.
• Never immerse the coffee maker in water or any other liquid.
• Be sure to unplug the power cord before cleaning the coffee maker.
• Do not use harsh cleaning products, sharp objects, brushes or other materials to clean the
coffee maker.
• Do not leave the adapters full inside the coffee maker. Once the coffee has been prepared,
remove them from the machine, remove any coffee grounds or capsules from inside and
clean the adapters with water and neutral soap.
• Dry the coffee maker adapters completely before using them again.
• Clean the machine casing with a soft, damp cloth.
• Do not pour water directly onto the machine.
• Do not open the lever during operation of the machine.
• Before starting the machine, the water tank must be filled with at least 200 ml of water.
• When removing the adapters, there may still be residual heat after
brewing the coffee, pay attention to high temperatures and be careful
not to burn yourself.
WARNING! The machine contains sharp blades in the preparation part.
Take special care when inserting or removing the cup and do not place
your hands in the area indicated in the image.
ADJUSTING THE COFFEE VOLUME
CLEANING AND MAINTENANCE
E NGLI SH
11