Page 1
CD RECEIVER KD-S100 RECEPTOR CON CD KD-S100 RÉCEPTEUR CD KD-S100 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this INSTRUCTIONS information for future reference. MANUAL DE INSTRUCCIONES Model No.
Page 2
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
Thank you for purchasing a JVC product. CONTENTS Please read all instructions carefully before operation, to ensure your complete understanding and to obtain Control panel ......... 5 the best possible performance from the unit. Remote controller — ..5 RM-RK300 The following marks are used to indicate...
Detaching the control panel Entering the various menus The main menu contains four menus (MODE, PSM, SEL, TITLE). • If no operation is done for about 15 seconds, menu screen is canceled. Select a menu you want. Attaching the control panel Time countdown indicator Enter the selected menu.
Control panel Parts identification BAND button DISP (display) button SOURCE button (eject) / (angle) button ¢ • Control dial buttons • POWER/ATT (attenuator)/ENTER button Remote sensor MENU button DO NOT expose the remote sensor to strong light ∞ (up) / (down) buttons (direct sunlight or artificial lighting).
• For MP3/WMA/SD/USB: Changes the folders. • Do not leave the remote controller in a place • While listening to an Apple iPod or a JVC (such as dashboards) exposed to direct sunlight D. player: for a long time;...
To drop the volume in a Getting started moment (ATT) To restore the sound, press it Basic operations again. Turn on the power. To turn off the power Ÿ Setting the clock FM/AM SIRIUS*/XM* • See also “General settings — PSM” on pages USB* CD-CH*/iPod*/D.
MO indicator lights up. Reception Radio operations improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3. The MO indicator Ÿ goes off. Start searching for a station. Tuning in to FM stations with strong signals only—LO (local)/ Selected band appears.
Store the station. Enter the MODE menu (see page 4). When using the remote controller After tuning in to a station you want to preset... Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz into preset Listening to a preset station...
Playing from an SD card Disc/SD card/USB memory Before detaching the control panel, turn off the power. operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. Ÿ SD loading slot To stop play and eject the disc Note:...
• Removing the USB memory will also stop playback. About the CD changer It is recommended to use a JVC MP3-compatible CD changer with your unit. • You can also connect MP3-incompatible CD changers. However, these units are not compatible with MP3 discs.
To go to the next or previous folders (only for Select a disc/folder/file from the list. MP3/WMA/SD/USB) Current folder For MP3 tracks: For WMA tracks: Ex.: When “Folder” is selected in step Only for MP3/WMA/SD/USB: If you select the current disc/folder (highlighted on the screen), its Folder/File List appears.
Prohibiting disc ejection Intro Plays the beginning 15 seconds of... You can lock a disc in the loading slot. Track : All tracks of the current playback media. Folder : First track of all folders of the current playback media. [ Disc : First track of all the inserted discs.
Setting the sound modes—SEL Sound adjustments You can adjust the sound characteristics to your Activating the Bongiovi Acoustics preference. Digital Power Station™ Enter the SEL menu (see page 4). The Bongiovi Acoustics Digital Power Station™ is Ÿ a digital processing method that maximizes the Select a setting item.
To adjust bass and treble—Bass/Tre To adjust the input level of each source—Vol Adj Select “Bass” or “Treble.” This setting is required for each source except for FM. Once an adjustment is made, it will be memorized. When you change the source, the volume level will automatically increase or decrease according to the Adjust the bass or treble.
Page 16
Indications Items Settings, [reference page] : Initial) Anime • On : An animation screen appears when you turn on or off the Animation power, change the source, and when you select MENU. • Off : Cancels. Clock H 1 – 12 (0 – 23) : See also page 7 for setting.
Page 17
: Deactivates the key-touch tone. Ext In • Changer : To use a JVC CD changer, [10], a JVC compatible satellite (SIRIUS/ External input XM) tuner, [20], or an Apple iPod or a JVC D. player, [23]. • Ext In : To use any other external component than the above, [25].
Page 18
Selecting timer for the dimmer Selecting the graphic theme You can dim the display at night or as you set the timer. You can select the graphic theme for large and small display sizes (see also page 4). Select “Dimmer” from the PSM menu. Select “Theme”...
Move to the next (or previous) character Title assignment position. You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Repeat steps until you finish entering the title.
Instructions supplied with your SIRIUS Satellite radio or XM Satellite radio. JVC DLP starts updating all the SIRIUS channels. Once completed, JVC DLP tunes in to the preset • “SIRIUS” and the SIRIUS dog logo are registered channel, CH184. trademarks of SIRIUS Satellite Radio Inc.
Contact XM Satellite radio on the internet Listening to the XM Satellite radio at <http://xmradio.com/activation/> to activate your subscription, or you can call 1-800-XM-RADIO (1-800-967-2346). Once completed, the unit tunes in to one of the available channels (Channel 4 or higher). Select a channel for listening.
Checking the XM Satellite radio ID Select a user preset number. While selecting “XM1,” “XM2,” or “XM3,” select “Channel 0.” • You can move to the lists of the other SIRIUS bands by turning the control dial. The display alternately shows “RADIO ID” and the Store the channel.
Holding also shows the Category List while listening to a channel. This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Selecting a channel from the list Enter the MODE menu (see page 4).
Preparations: Selecting a track from the menu Make sure “Changer” is selected for the external input setting, see page 17. Enter the main menu. ∞ ¢ Now the buttons work as the menu selecting buttons*. * The menu selecting mode will be canceled: Ÿ...
Other external component Selecting the playback modes operations Enter the MODE menu (see page 4). You can connect an external component to the LINE IN Select one of the playback modes. plugs on the rear or to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied).
To keep discs clean Maintenance A dirty disc may not play correctly. If a disc does become dirty, wipe it with How to clean the connectors a soft cloth in a straight line from center Frequent detachment will deteriorate the connectors. to edge.
Inserting a disc More about this unit • When a disc is inserted upside down, the control panel moves down, and the disc automatically ejects Basic operations from the loading slot. Turning on the power • If you keep the control panel open for about 1 minute, (beeps sound when the “Beep”...
Page 28
Playing an MP3/WMA discs Playing MP3/WMA tracks from an SD card or a USB memory • This unit can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of • While playing from an SD card or a USB memory, the the letter case—upper/lower).
Page 29
Satellite radio operations • If you change the source, playback also stops. • You can also connect the JVC SIRIUS radio PnP Next time you select the same source again, playback (Plug and Play), using the JVC SIRIUS radio adapter, starts from where it has been stopped previously.
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. •...
Page 31
Symptoms Remedies/Causes • Tracks do not play back in the order you have Playback order is determined when the files are recorded. intended them to play. • Elapsed playing time is not correct. This sometimes occurs while playing. This is caused by how the tracks are recorded on the disc.
Page 32
Symptoms Remedies/Causes • “No Disc” appears on the display. Insert a disc into the magazine. • “No Magazine” appears on the display. Insert the magazine. • “Reset 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
Page 33
Symptoms Remedies/Causes • The iPod or D. player does not turn on or • Check the connecting cable and its connection. does not work. • Update the firmware version. • Charge the battery. • Buttons do not work as intended. The functions of the buttons have been changed.
Specifications Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: +6 dB/–10 dB at 30 Hz Tre:...
Need help?
Do you have a question about the KD-S100 and is the answer not in the manual?
Questions and answers