TP-Link TD-W8951NB User Manual page 68

TD-W8951NB
Select the "MAC" as the Rule Type on the Filter screen (show in Figure 4-40).
Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then
select the Interface "PVC0", and select the Direction "Outgoing" for the first rule.
Note:
If you want to make the rule take effect, please select Yes to active the rule.
Step 3: Enter the "MAC Address" and select the Unmatched rule as "Next".
Step 4: Finally, click the SAVE to save the entry.
Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address
00-0A-EB-00-07-5F to access the Internet.
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You can
enter the IP / MAC Filter Set Index to view the information about the rule.
Other operations for the entries as shown in Figure 4-39:
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry.
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, and
then click the DELETE button to delete the entry.
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
, Then you can configure the specific rule for the example.
61