TP-Link TD-W8951NB User Manual page 57

TD-W8951NB
•
Application: Select the application that the rule aimed at.
•
Physical Ports: Select the port whose traffic flow are controlled by the rule.
•
Destination MAC & IP & Mask & Port Range: Enter the IP information about the
Destination host for the rule.
•
Source MAC & IP & Mask & Port Range: Enter the IP information about the Source
host for the rule.
•
Protocol ID: Select one among TCP/UDP, TCP, UDP or ICMP protocols for the
application.
•
Vlan ID Range: Enter the Vlan range, and the rule will be effective to the selected Vlans.
•
IPP/DS Field: Select the type of the action to assign the priority.
When you select IPP/TOS, you can assign the priority via IP information. IP QoS function is
intended to deliver guaranteed as well as differentiated Internet services by giving network
resource and usage control to the Network operator.
•
IP Precedence Range: Enter the IP precedence range that the Router takes to
differentiate the traffic.
•
Type of Service: Select the type of service that the Router takes to deal with the traffic.
•
802.1p: Select the priority range for the rule.
When you select DSCP, you can assign the priority via DHCP (the header of IP group). It maps the
IP group into corresponding service class.
•
DSCP Range: Enter the DSCP range to differentiate the traffic.
•
802.1p: Select the priority range for the rule.
Action: Configure the action that the Router takes to deal with the traffic which accord with
the rule.
•
IPP/DS Field: Select the type for the action.
•
IP Precedence Remarking: Select the number to remark the priority for IP precedence.
•
Type of Service Remarking: Select the type to remark the service.
•
DSCP Remarking: Enter the number to remark the DSCP priority.
•
802.1p Remarking: Select the type to remark the 802.1p priority.
•
Queue: Select the priority type for the action.
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
50