Call Settings; Security Settings - Toshiba TS705 User Manual

Settings

Call settings

To access the call settings:
1. In standby mode, press the Centre key. The
main menu is displayed.
2. Select Settings > Call settings.
You have the following call settings options:
• Hide ID: set whether or not to automatically
notify the person you are calling of your phone
number.
• Call waiting: enable or disable the call waiting
feature. The default setting is operator
customizable on the network only. The network
must be contacted to change this setting or
check the status of the setting.
• Call barring: enable or disable call barring for a
selected call type and to check the current state.
• Call divert: set to divert incoming calls to
another phone number. You can divert voice
calls, video calls, data and fax.
• Auto redial: control whether or not redial can be
tried automatically when it fails to originate call.
If set to On, a maximum of ten redials are made.
46
• Any key answer: control whether or not an
incoming call can be answered by keys other
than the Send key. Additional keys to answer
calls include the Select key, Up, Down, Left
and Right Navigation keys, Clear key, and any
digit key.
• Video calls: select whether or not to show the
caller's image and select an image to be shown.
Also, decide whether or not to activate the
speaker phone, and select the frame rate for the
video call.

Security settings

To access the security settings:
1. In standby mode, press the Centre key. The
main menu is displayed.
2. Select Settings > Security settings.
You have the following security options:
• Auto key lock: determines whether or not the
keyguard is activated automatically after two
minutes if no keys are pressed from the standby
display.