Positioning Settings - Nokia 002Q942 User Manual

and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating the
distance. Route guidance is active only when you move.
To set your trip destination, select
destination and a landmark as the destination, or enter
the latitude and longitude coordinates.
To clear the destination set for your trip, select
navigation.
Retrieve position information
Select Menu Applications
>
Position.
In the position view, you can view the position
information of your current location. An estimate of the
accuracy of the location is displayed.
To save your current location as a landmark, select
Options Save position. Landmarks are saved locations
>
with more information, and they can be used in other
compatible applications and transferred between
compatible devices.
Trip meter
Select Menu Applications
>
distance.
76
Options Set
>
Stop
GPS GPS data and
> >
GPS GPS data and Trip
> >
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
To turn trip distance calculation on or off, select
Start or Stop. The calculated values remain on the display.
Use this feature outdoors to receive a better GPS signal.
To set the trip distance and time and average and
maximum speeds to zero, and to start a new calculation,
select Options > Reset. To set the trip meter and total
time to zero, select Restart.

Positioning settings

Select Menu Ctrl. panel
>
Positioning.
Positioning methods
Select from the following:
Integrated GPS — Use the integrated GPS receiver of
•
your device.
Assisted GPS — Use Assisted GPS (A-GPS) to receive
•
assistance data from an assistance data server.
Bluetooth GPS — Use a compatible external GPS
•
receiver with Bluetooth connectivity.
Network based — Use information from the cellular
•
network (network service).
Positioning server
To define an access point and positioning server for
network-assisted positioning methods, such as assisted
GPS or network-based positioning, select
server. The positioning server may be preset by your
Options
Settings and General
>
Positioning
>
>