Nokia 002Q942 User Manual page 139

To stop the background scans, select
panel Settings and Connection
>
Show WLAN availability
scan for available WLANs and connect to WLANs as usual.
To increase the background scan interval, select
WLAN availability > Yes, and define the interval in
for networks.
Q: Why can't I browse the web even though the
WLAN connection is working and the IP settings
are correct?
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your WLAN
access point.
Q: How do I check the signal quality of my WLAN
connection? — Select Menu
Connectivity Conn. mgr.
>
connections Options
>
is weak or moderate, you may encounter connection
problems. Try again closer to the access point.
Q: Why do I have problems with the security
mode?
A: Check that you have configured the security mode
correctly, and that it is the same that the network uses. To
check the security mode the network uses, select
Ctrl. panel Connectivity
>
data connections Options
>
Check also the following: you have the correct WPA mode
(preshared key or EAP), you have disabled all EAP types that
are not needed, and all the EAP type settings are correct
(passwords, user names, certificates).
Menu Ctrl.
>
Wireless LAN
>
> Never. You can still manually
Show
Ctrl. panel
> >
and Active data
> Details. If the signal quality
Menu
Conn. mgr. and Active
>
> Details.
Q: Why can't I select a contact for my message?
>
A: The contact card does not have a phone number, an
address, or an e-mail address. Select
and edit the contact card.
Q: The note Retrieving message is shown
Scan
briefly. What is happening?
A: The device is trying to retrieve a multimedia message
from the multimedia messaging centre. This note is shown
if you have selected
Settings Multimedia message
>
retrieval Always
>
for multimedia messaging are defined correctly and that
there are no mistakes in phone numbers or addresses.
Q: How can I end the data connection when the
device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop the
device from making a data connection, select
Messaging and
message Multimedia retrieval
>
multimedia messaging centre save messages to be
retrieved later, or
messages. If you select Manual, you receive a notification
>
when there is a new multimedia message that you can
retrieve in the multimedia message centre. If you select
Off, the device does not make any network connections
related to multimedia messaging.
To set the device to use a packet data connection only if
you start an application or action that needs it, select
Menu Ctrl. panel
>
Menu
Menu Messaging
>
Multimedia
>
automatic. Check that the settings
Options Settings
> >
Manual
>
Off to ignore all incoming multimedia
Settings and Connection
>
> Contacts,
and Options
>
Menu
>
Multimedia
to have the
139
>